Produkte / Products

Hundehalsband mit Microfaser-Unterfütterung / Dog collar with microfibre padding

 (For English version please scroll down)

 

A) Das Halsband mit Klickverschluss ist das perfekte Halsband zum Mitwachsen! Es ist stufenlos verstellbar und hat i.d.R. einen Verstellbereich von 10 cm. Die Microfaser-Unterfütterung fühlt sich sehr weich an und ist Teil des Designs, da sie an den Seiten des Gurtbandes übersteht und so zum Gesamtbild beiträgt.


Bei der Bestellung bitte die gewünschte Farbkombinination und den Halsumfang des Hundes angeben (enganliegend mit einem Maßband direkt am Hund gemessen - bitte keine vorhandenen Halsbänder ausmessen), sowie die Info, ob der Hund noch im Wachstum ist. Dies wird bei der Berechnung des Verstellbereichs mit einkalkuliert!

 

B)  Zugstopp-Halsband - der besondere Tragekomfort! Ein Zugstopp-Halsband ist besonders bequem für Hunde, da es ganz locker um den Hals liegt und so kaum zu spüren ist. Sobald der Hund zu ziehen anfängt, schließt sich das Halsband auf normalen Halsumfang ohne zu würgen. Aus diesem Grund ist diese Variante nur für ausgewachsene Hunde zu empfehlen und ein exaktes Messen absolut notwendig. Nur so ist gewährleistet, dass das Halsband nie zu eng wird. Dieses Halsband ist nicht verstellbar.

 

Bitte bei der Bestellung neben dem Halsumfang des Hundes auch das Maß des Kopfes an der breitesten Stelle mit angeben!

 

Länge: nach individuellen Maßen - alle Größen ein Preis!

Oberseite:

- Webband-Verzierung (siehe Materialauswahl)
- Gurtband - für die Stabilität - (siehe Materialauswahl):

 

Folgende Grutbandbreiten möglich:

20 mm breit (Standard),

15 mm breit für kleine Hunde

10 mm für sehr kleine Hunde

25 mm breit für große Hunde

30 mm breit gegen Aufpreis!

Achtung! - Nicht jede Borte passt auf alle Breiten. Dies gilt meist bei 10 und 15 mm Breite. In Ausnahmefällen kann eine Borte auch für das 20 mm breite Gurtband zu breit sein. Daher vor der Bestellung bitte anfragen.


Unterseite:
Microfaser (siehe Materialauswahl)
steht an den Gurtbandrändern über, daher ist das Halsband um knapp 10 mm breiter als das Gurtband

 

Meine Hundehalsbänder werden liebevoll von Hand gefertigt. Ich achte sehr darauf, dass die Nähte aufgrund stets angepasster Farbwahl bei den einzelnen Teilen möglichst wenig zu sehen sind. Selbstverständlich haben alle Halsbänder eine stabile Verarbeitung mit hochwertigen Materialien.


Verwendete Materialien
Gurtband: 100 % Polypropylen (PP)
Webband: 100% Polyester
Unterfütterung: Microfaser (100% Polyester)
Metallteile: Stahl bzw. Zinkdruckguss vernickelt
Steckschließe: Acetat/Nylon oder Alu (gegen Aufpreis)

Pflege:
Das mit Microfaser unterfütterte Halsband kann bei 30° Schonwaschgang im Wäschesäckchen oder per Handwäsche gewaschen werden.

 

__________________________________________________________________________________________________________________________________________________________

 

 

A) A dog collar with buckle and a lining of microfiber is perfect for growing dogs! It’s staplessly adjustable at least for 10 cm/4 inches. This collar is completely padded with microfibre, which softens the edges and adds additional color to the design.


Please measure your dog’s neck – not an existing collar – for the order. Specify the desired color combination and the width of the webbing when ordering. I also need the information, if the dog is still growing for calculating the adjustment.

 

B)  Martingale / loose-fit collar - a collar with special wearing comfort! Wearing a Martingale collar is nearly like wearing nothing at all to the dog – he hardly feels it.  Most of the time it has a loose fit around the neck.  Only when the dog pulls, it closes to the size of his neck without suffocating him. To make this work, it is absolutely necessary to make an exact fitting for the collar. Beside this, the dog must have completed his growth. Otherwise the collar could get to tight. This collar is not adjustable!

 

When ordering, please also add the head circumference on the biggest part of the head. This measurement is needed to be able to pull the collar over the dog’s head.

Top:
- Ribbon (selection)
- Webbing – for stability (selection)

You can choose from the following width of Webbing:
20 mm/0,79” (Standard),
15 mm/0,59” for small dogs
25 mm/1” for very big dogs


Please note: Not every ribbon fits on all widths! Most of the ribbons don’t fit on 15mm/0,59” straps. But also on 20mm/0,79” webbing there are some ribbons which don’t fit. So please contact me before ordering for clarification if the selected ribbon is suitable for your strap.

Bottom:
Microfibre (selection).
The padding is overlapping the edges of the webbing. So, the collar is about 5-10mm (about 0,2” – 0,4”) wider than the strap.

My products are made by hand with lots of love to the process. I take great care in matching colors of threads and material, so they blend in as much as possible. Of course, all my products have a stable processing and the materials are of high quality.


Used materials:
Webbing: 100 % Polypropylen (PP)
Ribbon: 100% Polyester
Lining: Microfibre (100% Polyester)
Metal parts: steel or zinc diecasting nickel-plated
Buckle: acetate/nylon or aluminum (last with additional costs)

Laundry:
Collars with microfibre can be washed at 30° C/86° F in a laundry bag or by hand wash.

26,95 €

  • verfügbar
  • 5 - 9 Tage Lieferzeit1

Hundehalsband mit Leder-Unterfütterung / Dog collar with leather padding

(For English version please scroll down)

 

Das Halsband mit Leder-Unterfütterung sieht besonders edel aus! Die Leder-Unterfütterung gibt zusätzliche Festigkeit und ist Teil des Designs, da sie an den Seiten des Gurtbandes übersteht und so zum Gesamtbild beiträgt.

 

A) Halsband mit Klickverschluss - Dieses ist stufenlos verstellbar und hat i.d.R. einen Verstellbereich von 5 cm. Bitte beachten, dass der Verstellbereich bei Leder-Unterfütterung nicht so groß ausfällt. Wenn der Hund noch recht viel Wachstum vor sich hat, empfehlen wir unsere Variante mit Microfaser-Unterfütterung (siehe anderes Angebot).

Bei der Bestellung bitte die gewünschte Farbkombinination und den Halsumfang des Hundes angeben (enganliegend mit einem Maßband direkt am Hund gemessen - bitte keine vorhandenen Halsbänder ausmessen), sowie die Info, ob der Hund noch im Wachstum ist. Dies wird bei der Berechnung des Verstellbereichs mit einkalkuliert!

 

B) Halsband als Zugstopp - der besondere Tragekomfort! Ein Zugstopp-Halsband ist besonders bequem für Hunde, da es ganz locker um den Hals liegt und so kaum zu spüren ist. Sobald der Hund zu ziehen anfängt, schließt sich das Halsband auf normalen Halsumfang ohne zu würgen. Aus diesem Grund ist diese Variante nur für ausgewachsene Hunde zu empfehlen und ein exaktes Messen absolut notwendig. Nur so ist gewährleistet, dass das Halsband nie zu eng wird. Dieses Halsband ist nicht verstellbar.

 

Bitte bei der Bestellung neben dem Halsumfang des Hundes auch das Maß des Kopfes an der breitesten Stelle mit angeben.


Länge: nach individuellen Maßen - alle Größen ein Preis!

Oberseite:

- Webband-Verzierung (siehe Materialauswahl)
- Gurtband - für die Stabilität - (siehe Materialauswahl):

 

Folgende Grutbandbreiten möglich:

20 mm breit (Standard),

15 mm breit für kleine Hunde

10 mm für sehr kleine Hunde (dann nur ca. 2 cm Verstellbereich!)

25 mm breit für große Hunde

30 mm breit gegen Aufpreis

Achtung! - Nicht jede Borte passt auf alle Breiten. Dies gilt meist bei 15 mm Breite. In Ausnahmefällen kann eine Borte auch für das 20 mm breite Gurtband zu breit sein. Daher vor der Bestellung bitte anfragen.


Unterseite:
Leder (siehe Materialauswahl)
steht an den Gurtbandrändern über, daher ist das Halsband um knapp 10 mm breiter als das Gurtband

 

Meine Hundehalsbänder werden liebevoll von Hand gefertigt. Ich achte sehr darauf, dass die Nähte aufgrund stets angepasster Farbwahl bei den einzelnen Teilen möglichst wenig zu sehen sind. Selbstverständlich haben alle Halsbänder eine stabile Verarbeitung mit hochwertigen Materialien.


Verwendete Materialien
Gurtband: 100 % Polypropylen (PP)
Webband: 100% Polyester
Unterfütterung: echtes Leder
Metallteile: Stahl bzw. Zinkdruckguss vernickelt
Steckschließe: Acetat oder Alu (gegen Aufpreis)

Pflege:
Das mit Leder unterfütterte Halsband kann per Handwäsche gewaschen werden.

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

Leather padding - the noble version of a dog collar! This collar is completely padded with leather, which gives more stability and adds additional color to the design.

A)  Collar with click buckle - This collar is staplessly adjustable for about 5 cm/2". Please note: If your dog is in growth and needs more adjustment than this, I recommend my collars lined with microfibre, which have more adjustment (separate poduct in my shop).

 

Please add to you order the exact measurement of your dog’s neck – not an existing collar. Specify the desired color combination and the width of the webbing when ordering. I also need the information, if the dog is still growing for calculating the adjustment.

 

B) Martingale-collar / loose-fit collar – a collar with special wearing comfort! Wearing a martingale collar is nearly like wearing nothing at all to the dog – he hardly feels it.  Most of the time it has a loose fit around the neck.  Only when the dog pulls, it closes to the size of his neck without suffocating him. To make this work, it is absolutely necessary to make an exact fitting for the collar. Beside this, the dog must have completed his growth. Otherwise the collar could get to tight. This collar is not adjustable!

 

When ordering, please also add the head circumference on the biggest part of the head. This measurement is needed to be able to pull the collar over the dog’s head.

All lengths one price!

 

Top:
- Ribbon (selection)
- Webbing – for stability (selection)

You can choose from the following width of Webbing:
20 mm/0,79” (Standard),
15 mm/0,59” for small dogs
25 mm/1” for big dogs

30 mm/1,18" with extra charge

Please note: Not every ribbon fits on all widths! Most of the ribbons don’t fit on 15mm/0,59” straps. But also on 20mm/0,79” webbing there are some ribbons which don’t fit. So please contact me before ordering for clarification if the selected ribbon is suitable for your strap, when you are not sure.

Bottom:
Nappa leather (selection).
The padding is overlapping the edges of the webbing. So, the collar is about 5-10mm (about 0,2” – 0,4”) wider than the strap.

My products are made by hand with lots of love to the process. I take great care in matching colors of threads and material, so they blend in as much as possible. Of course, all my products have a stable processing and the materials are of high quality.


Used materials:
Webbing: 100 % Polypropylen (PP)
Ribbon: 100% Polyester
Lining: Nappa Leather
Metal parts: steel or zinc diecasting nickel-plated

Laundry:
Collars with leather can be washed by hand wash.

29,95 €

  • verfügbar
  • 5 - 9 Tage Lieferzeit1

Hundeleine verschiedene Längen und Varianten / Dog leashes in verious lengths and versions

 (For English version please scroll down)

 

A) Microfaser-Unterfütterung

Die Leine mit dem weichen Griff!  Durch die Microfaser-Unterfütterung auf der ganzen Länge der Leine, fühlt sich diese Leine sehr weich an. Zudem ist diese Leine besonders leicht.

 

B) Leder-Unterfütterung

Die Leder-Unterfütterung gibt der Leine besondere Festigkeit. Echtes Leder sieht edel aus.

 

In beiden Varianten sind die Kanten durch die überstehende Unterfütterung gepolstert.


Es werden folgende Längen-Varianten angeboten:

2m Leine - durch einen zusätzlichen Karabiner kürzbar auf 1m (Standard)

2m Leine - mit doppelter Verstellmöglichkeit: kürzbar auf 1m und 1,50m (Aufpreis)

2,50m Leine - einfach verstellbar/kürzbar auf die Hälfte (Aufpreis)

1,20m Cityleine - die Leine für den Hund, der nur für kurze Zeit angeleint werden soll (z. B. zum Überqueren der Straße) ohne Verstellmöglichkeit

0,45m Kurzführer, wenn der Hund besonders kurz gehalten werden soll bzw. zur Kombination mit anderen Leinen (auch vorhandene ältere), um eine Zwillingsleine zu bilden. (Bitte bei Bestellung des Kurzführers zum Zwecke der Bildung einer Zwillingsleine dies als Notiz angeben, dann füge ich noch den Rundring zum Verbinden bei).

 

weitere individuelle Varianten auf Anfrage möglich! :-)

 

Bitte bei der Bestellung die gewünschte Farbkombinination sowie die Größe des Hundes angeben, damit ich die richtige Breite für das Gurtband wähle bzw. die gewünschte Breite vermerken!


Oberseite:

- Webband-Verzierung (siehe Materialauswahl)
- Gurtband - für die Stabilität - (siehe Materialauswahl):

 

Folgende Grutbandbreiten möglich:

20 mm breit (Standard),

15 mm breit für kleine Hunde

25 mm breit für große Hunde

Achtung! - Nicht jede Borte passt auf alle Breiten. Dies gilt meist bei 15 mm Breite. In Ausnahmefällen kann eine Borte auch für das 20 mm breite Gurtband zu breit sein. Daher vor der Bestellung bitte anfragen.


Unterseite:
Microfaser (siehe Materialauswahl) oder echtes Leder (siehe Materialauswahl)
steht an den Gurtbandrändern über, daher ist die Leine um 5-8 mm breiter als das Gurtband

 

Meine Hundeleinen werden liebevoll von Hand gefertigt. Ich achte sehr darauf, dass die Nähte aufgrund stets angepasster Farbwahl bei den einzelnen Teilen möglichst wenig zu sehen sind. Selbstverständlich haben alle Leinen eine stabile Verarbeitung mit hochwertigen Materialien.


Verwendete Materialien
Gurtband: 100 % Polypropylen (PP)
Webband: 100% Polyester
Unterfütterung: Microfaser (100% Polyester) oder echtes Nappaleder
Metallteile: Stahl bzw. Zinkdruckguss vernickelt

Pflege:
Die mit Microfaser unterfütterte Leine kann bei 30° Schonwaschgang im Wäschesäckchen oder per Handwäsche gewaschen werden. Eine mit Leder unterfütterte Leine sollte nur per Handwäsche gewaschen werden.

 

__________________________________________________________________________________________________________________________________________________________________

 

A) Microfiber padding:

The dog leash with a soft grip! This leash is completely padded with microfibre. Therefore it feels very soft and light as a feather. The padding also adds additional color to the design.

 

B) Leather padding:

Leather padding - the noble version of a dog leash! This leash is completely padded with leather, which gives more stability and adds additional color to the design.

 

The padding of both versions softens the edges of the webbing, so it is comfortable in your hands.

You can choose from the following Versions:

- Standard leash 2m / 78,75" (1x adjustable) - the length could be reduced to 40"

- leash 2m / 78,75" (2x adjustable) - the length could be reduced to 40" or 60"

- leash 2,50m / 98,5" (1x adjustable)
- City leash 1,20 m / 47" - If your dog is going without leash most of the time and needs only to be leashed for a short distance, (e.g. to cross the street) so this leash ist best for you. It is short and not adjustable.

- Traffic leash 0,45m / 17,75": If you want an extra short leash or for combination with other leashes (also old ones you already have) to get a twin leash (If you order the traffic leash to create a twin leash with other leashes, please note this information on your order, so I will add the ring for connecting the leashes).

 

For more individual versions please contact me! :-)

 

Please specify the desired color combination and the width of the webbing when ordering.


Top:
- Ribbon (selection)
- Webbing – for stability (selection)

You can choose from the following width of Webbing:
20 mm/0,79” (Standard),
15 mm/0,59” for small dogs
25 mm/1” for very big dogs

Please note: Not every ribbon fits on all widths! Most of the ribbons don’t fit on 15mm/0,59” straps. But also on 20mm/0,79” webbing there are some ribbons which don’t fit. So please contact me before ordering for clarification if the selected ribbon is suitable for your strap, when you are not sure.

Bottom:
Microfibre (selection) or Nappa leather (selection).
The padding is overlapping the edges of the webbing. So, the leash is about 5-8 mm (about 0,2” – 0,3”) wider than the strap.

My products are made by hand with lots of love to the process. I take great care in matching colors of threads and material, so they blend in as much as possible. Of course, all my products have a stable processing and the materials are of high quality.


Used materials:
Webbing: 100 % Polypropylen (PP)
Ribbon: 100% Polyester
Lining: Microfibre or Nappa Leather
Metal parts: steel or zinc diecasting nickel-plated

Laundry:
Leashes with leather can be washed by hand wash. Leashes with microfibre can be washed at 30° C/86° F in a laundry bag or by hand wash.

35,95 €

  • verfügbar
  • 5 - 9 Tage Lieferzeit1

Y-Geschirr bzw. Brustgeschirr / Y-Harness

(For English version please scroll down)

 

Das Geschirr zum Mitwachsen!

 

Hier kann (fast) jedes Band verstellbar gemacht werden, sodass das Geschirr mit dem Hund mitwächst. :-)

 

Der Preis richtet sich nach dem Bauchumfang:

Größe 1 - Bauchumfang bis 45 cm (Rückensteg nur bedingt verstellbar möglich - je nach Länge)

Größe 2 - Bauchumfang bis 60 cm

Größe 3 - Bauchumfang bis 70 cm

Größe 4 - Bachumfang ab 71 cm

 

Damit das Geschirr gut sitzt ist dennoch ein exaktes Messen nötig! Bitte hierzu die Skizze beim Messen beachten:

 

Bauchumfang (blau):

Für den Bauchgurt den Bauchumfang ca. 3 – 4 Finger (bei größeren Hunden etwa eine Handbreit) hinter den Vorderläufen an der tiefsten Stelle des Brustkorbes rund herum messen. Der Abstand zu den Vorderläufen ist wichtig, damit die Bewegungsfreiheit des Hundes durch das Geschirr nicht beeinträchtigt wird.

 

Rückensteg (grün):

Das ist der Steg, der über den Rücken des Hundes läuft. Hierzu misst man von den Schulterblättern, die man deutlich im Nacken des Hundes spüren kann, bis zu der Stelle an der der Bauchumfang gemessen wurde.

 

Bruststeg (rot):

Das ist der Teil des Geschirrs, der zwischen den beiden Vorderläufen durchführt. Er beginnt am Brustbein des Hundes. Dieses steht unterhalb des Halsansatzes spitz hervor und ist deutlich spürbar. Gemessen wird von dieser Stelle, zwischen den Vorderläufen durch bis zur Höhe, an der man den Bauchumfang gemessen hat.

 

Halsgurt/tiefer Halsumfang (lila):

Um den tiefen Halsumfang für den Halsgurt zu messen, verbindet man die ertasteten Punkte (wie oben beschrieben) zwischen den Schulterblättern und das Brustbein miteinander. Hierzu ertastet man wieder die Schulterblätter, legt das Maßband an und führt es seitlich am Hals vorbei bis an die Stelle, an der man das Brustbein spürt.

 

Bitte alle Maße notieren und zusammen mit der gewünschten Farbkomination bei der Bestellung mit angeben! Wichtig ist auch, ob der Hund noch im Wachstum ist. Hierbei ist es hilfreich zu wissen, welcher Rasse der Hund angehört und wie alt er ist.

 

Oberseite:

- Webband-Verzierung (siehe Materialauswahl)

- Gurtband - für die Stabilität - (siehe Materialauswahl):

 

Folgende Grutbandbreiten sind möglich:

 10 mm breit (Größe 1 - für sehr kleine Hunde)

 15 mm breit (Größe 1)

 20 mm breit (Größe 2, evtl. auch Größe 1, wenn der Hund nicht zu klein ist oder man die Unterfütterung weg lässt)

 25 mm breit (ab Größe 2)

 

Achtung! - Nicht jede Borte passt auf alle Breiten. Dies gilt meist bei 10 mm und 15 mm Breite. In Ausnahmefällen kann eine Borte auch für das 20 mm breite Gurtband zu breit sein. Daher vor der Bestellung bitte anfragen.

 

Unterseite:

Microfaser (siehe Materialauswahl)

steht an den Gurtbandrändern über, daher ist die Leine um knapp 10 mm breiter als das Gurtband

 

Ist eine Unterfütterung mit Leder gewünscht, kann hier nur ein nicht verstellbares Geschirr angeboten werden. Lediglich der Bauchgurt hat einen Schieber zum Verstellen. Damit dieses Geschirr richtig sitzt ist ein exaktes Messen unabdingbar! Der Preis entspricht dem Geschirr mit Microfaser.  Die eigentlich entstehenden Mehrkosten für Leder gleichen sich mit dem Verzicht auf die Verstellbarkeit aus.

 

Meine Geschirre werden liebevoll von Hand gefertigt. Ich achte sehr darauf, dass die Nähte aufgrund stets angepasster Farbwahl bei den einzelnen Teilen möglichst wenig zu sehen sind. Selbstverständlich haben alle Geschirre eine stabile Verarbeitung mit hochwertigen Materialien.

 

Verwendete Materialien

Gurtband: 100 % Polypropylen (PP)

Webband: 100% Polyester

Unterfütterung: Microfaser (100% Polyester) / Nappa-Leder

Metallteile: Stahl bzw. Zinkdruckguss vernickelt

Steckschließe: Acetat bzw. Nylon

 

Pflege:

Das mit Microfaser unterfütterte Geschirr kann bei 30° Schonwaschgang im Wäschesäckchen oder per Handwäsche gewaschen werden.

 

_______________________________________________________________________________________________________________________________________________________

 

This harness is perfect for growing dogs!
 
The microfibre padded version can be made adjustable on (nearly) every strap, so the harness is able to grow with your dog. :-)
 
The price depends on the  girth:
Size 1 – girth up to 45 cm (for very small dogs it is not possible to make the back strap adjustable)
Size 2 - girth up to 60 cm
Size 3 - girth up to 70 cm
Size 4 - girth up to 71 cm
 
For an accurate fit of the harness, the measurement has to be precisely.  Please refer to my drawing at the pictures above:
 
Girth strap (blue):
To get the circumference of the girth, please make your measurement around the dogs body  3 – 4 fingers wide behind the dogs forelegs (for bigger dogs use the width of a whole hand). This should be the widest part of your dogs chest. The distance to the forelegs is important, so the free moving space of your dog is not constricted.
 
Back strap (green):
This strap is the distance between the neck strap and the girth strap. Please measure from the shoulder blades (you can feel the point between them) to the point, where the girth strap has been measured.
 
Chest strap (red):
This is the part of the harness, which begins at the neck strap and is going between the legs to the girth strap. Please measure from the breast bone (which can be felt clearly as a pointed bone on the front of your dog) to the point where the girth strap has been measured.
 
Lower Neck circumference (purple):
To get the lower neck circumference you have to connect the two points of the breast bone and the point between the sholder blades, where you started measuring the back strap. Now measure around the dogs neck by including these two points.  You can‘t take the normal size of a collar, because it is important to get the chest and back strap to connect properly. Otherwise the harness wouldn‘t fit.
 
Please note all these measurements and your desired color combination on the text field of your order. It is also important for me to know, if your dog is still growing and to which race he belongs. 
 
Top of the straps:
- Ribbon (Selection)
- Webbing – for stability  (Selection)
 
You can choose from the following width of Webbing:
10 mm/0,39“ (Size 1 - very small dogs)
15 mm/0,59” (Size 1 - for small dogs)
20 mm/0,79” (Size 2, maybe Size 1, if the dog is not to small or without padding)
25 mm/1” (Size 2 or more - for big dogs)

Please note: Not every ribbon fits on all widths! Most of the ribbons don’t fit on 15mm/0,59” straps. But also on 20mm/0,79” webbing there are some ribbons which don’t fit. So please contact me before ordering for clarification if the selected ribbon is suitable for your strap.
 
Bottom:
Microfibre (Selection)
The padding is overlapping the edges of the webbing. So, the final strap is about 5-10mm (about 0,2” – 0,4”) wider than the webbing.
 
If you want to have a leather padding, I only could offer an harness, which is only adjustable on the  girth strap. All other straps will not be adjustable. Especially in this case, it is mandatory to make an exact measurement, to get a fitting harness! The price is the same as the harness with microfibre padding. As leather is more expensive the additional costs are compensated because of the lack of adjustment on the other straps.
 
My products are made by hand with lots of love to the process. I take great care in matching colors of threads and material, so they blend in as much as possible. Of course, all my products have a stable processing and the materials are of high quality.
 
Used materials:
Webbing: 100 % Polypropylen (PP)
Ribbon: 100% Polyester
Lining: Microfibre (100% Polyester) or leather
Metal parts: steel or zinc diecasting nickel-plated
Buckle: acetate/nylon or aluminum (last with additional costs)

Laundry:
Harnesses with microfibre can be washed at 30° C/86° F in a laundry bag or by hand wash. Harnesses with leather padding can only washed by hand.

44,95 €

  • verfügbar
  • 5 - 9 Tage Lieferzeit1

Norweger-Geschirr / Norwgian harness

(For English version please scroll down)

 

Der Klassiker unter den Geschirren!

 

Das Norweger-Geschirr kann mit Microfaser oder auch mit Leder unterfüttert werden. Bei der Leder-Variante wird der Brustgurt und der nicht verstellbare Teil des Bauchgurtes unterfüttert. Bei der Microfaser-Variante ist das Geschirr komplett unterfüttert.

 

Der Preis richtet sich nach dem Bauchumfang:

 Größe 1 - Bauchumfang bis 45 cm

 Größe 2 - Bauchumfang bis 60 cm

 Größe 3 - Bauchumfang bis 70 cm

 Größe 4 - Bachumfang ab 71 cm

 

Bei dieser Geschirr-Variante ist lediglich der Bauchgurt verstellbar. Deshalb ist es am besten, dieses Geschirr erst zu bestellen, wenn der Hund bereits ausgewachsen ist. Andernfalls verschieben sich die Proportionen und das Verhältnis zwischen den Gurten stimmt nicht mehr, was zu einer falschen Belastung beim Hund führen kann. Damit das Geschirr gut sitzt, ist es absolut notwendig exakt zu messen! Bitte hierzu die Skizze beim Messen beachten:

 

Bauchumfang (blau):

Für den Bauchgurt den Bauchumfang ca. 3 – 4 Finger (bei größeren Hunden etwa eine Handbreit) hinter den Vorderläufen an der tiefsten Stelle des Brustkorbes rund herum messen. Der Abstand zu den Vorderläufen ist wichtig, damit die Bewegungsfreiheit des Hundes durch das Geschirr nicht beeinträchtigt wird und nichts an den Läufen scheuert.

 

Brustgurt (rot):

Auf Höhe des Brustbeines wird einmal herum von Bauchgurt zu Bauchgurt gemessen (Anleitung siehe auch Messung des Rückenmaßes). Das Brustbein steht unterhalb des Halsansatzes spitz hervor und ist deutlich spürbar. Dieser Punkt zum Ansetzen des Maßbandes ist wichtig, da später hier der Druckpunkt beim Ziehen des Hundes liegt. Der Brustgurt darf nicht höher sitzen, da der Hund sonst gewürgt wird. Sitzt er dagegen zu tief, behindert es den Hund beim Laufen.

 

Rückenmaß (grün):

Mit diesem Maß wird festgestellt, auf welcher Höhe der Brustgurt auf dem Bauchgurt liegen muss. Er darf nicht unterhalb der Schulterblätter sitzen, soll aber auch nicht zu hoch angesetzt werden, damit der Hund nicht gewürgt wird. Daher nimmt man die Stelle, auf Höhe des Brustbeines. Dieses Maß kann man ablesen, wenn man zwei Maßbänder (bzw. zum Maßband um den Bauch noch eine Schnur/Stoffband/Kreppklebeband als Ersatz für den Brustgurt) aufeinander legt. Einfach die Länge zwischen den beiden Bändern oben rum (der Teil über dem Rücken) nehmen.

 

Bitte alle Maße notieren und zusammen mit der gewünschten Farbkombination bei der Bestellung mit angeben! Wichtig ist auch, ob der Hund noch im Wachstum ist. Hierbei ist es hilfreich zu wissen, welcher Rasse der Hund angehört und wie alt er ist.

 

Oberseite:

- Webband-Verzierung (siehe Materialauswahl)

- Gurtband - für die Stabilität - (siehe Materialauswahl) - Infos hierzu auch in den FAQs

 

Folgende Grutbandbreiten sind möglich und können auch in zwei Größen kombiniert werden (breiterer Brustgurt in der nächst größeren Breite):

 10 mm breit (Größe 1 - für sehr kleine Hunde oder Katzen)

 15 mm breit (Größe 1)

 20 mm breit (Größe 2, evtl. auch Größe 1, wenn der Hund nicht zu klein ist oder man die Unterfütterung weg lässt)

 25 mm breit (ab Größe 2)

 30mm breit für den Brustgurt in Kombination mit einem schmaleren Bauchgurt bei großem Hund

 

Achtung! - Nicht jede Borte passt auf alle Breiten. Dies gilt meist bei 10 mm sowie 15 mm Breite. In Ausnahmefällen kann eine Borte auch für das 20 mm breite Gurtband zu breit sein. Daher vor der Bestellung bitte anfragen.

 

Unterseite:

Microfaser oder echtes Leder

steht an den Gurtbandrändern über, daher ist die Leine um knapp 10 mm breiter als das Gurtband

 

Meine Geschirre werden liebevoll von Hand gefertigt. Ich achte sehr darauf, dass die Nähte aufgrund stets angepasster Farbwahl bei den einzelnen Teilen möglichst wenig zu sehen sind. Selbstverständlich haben alle Geschirre eine stabile Verarbeitung mit hochwertigen Materialien.

 

Verwendete Materialien

Gurtband: 100 % Polypropylen (PP)

Webband: 100% Polyester

Unterfütterung: Microfaser (100% Polyester) bzw. echtes Leder

Metallteile: Stahl bzw. Zinkdruckguss vernickelt

Steckschließe: Acetat bzw. Nylon

 

Pflege:

Das mit Microfaser unterfütterte Geschirr kann bei 30° Schonwaschgang im Wäschesäckchen oder per Handwäsche gewaschen werden. Das mit Leder unterfütterte Geschirr sollte nur per Handwäsche gewaschen werden

 

_________________________________________________________________________________________________________________________________________________________________

Norwegian harness – a classic!

The Norwegian harness can be choosen with padding of microfibre or leather. The leather version will be padded on the chest strap and the not adjustable part of the girth strap. The harness with microfibre is completely padded.


The price depends on the girth:
Size 1 – girth up to 45 cm
Size 2 - girth up to 60 cm
Size 3 - girth up to 70 cm
Size 4 - girth up to 71 cm

This harness is only adjustable at the girth strap. So I recommend to order this harness only for adult dogs. The proportions of your dog will shift while growing, so the straps will not suit any longer. The result of this will be pressure on the wrong points, which causes malposition of your dog. It is mandatory to make an exact measurement, to get a fitting harness! Please refer to my drawing at the pictures above:


Girth strap (blue):
To get the circumference of the girth, please make your measurement around the dogs body 3 – 4 fingers wide behind the dogs forelegs (for bigger dogs use the width of a whole hand). This should be the widest part of your dogs chest. The distance to the forelegs is important, so the free moving space of your dog is not constricted.

Chest strap (red):
The chest strap runs around the front of your dog from girth strap to girth strap. It is important to measure on the same level as the chest bone is situated (which can be felt clearly as a pointed bone on the front of your dog). You have to choose the height of the chest bone, because the chest strap of the harness will give pressure to this point, when the dog is pulling. If this strap is higher than this point, your dog can be choked. If it is lower, your dog will have problems to run properly.

Back part of the girth strap (green):
This measurement will give me the points, where the chest strap will meet the girth strap. It marks the height of the chest bone (refer to the description of chest strap). To get the measurement right, please use two measuring tapes or a string and a measuring tape as placeholders for chest strap and girth strap. Then note the distance on the back of your dog between the to points on the girth strap, where the chest strap meets the girth strap. You also can make a makeshift harness out of tape. Perhaps this helps with a fidgety dog.

Please note all these measurements and your desired color combination on the text field of your order. It is also important for me to know, if your dog is still growing and to which race he belongs.

Top of the straps:
- Ribbon (Selection)
- Webbing – for stability (Selection)

You can choose from the following width of Webbing. It is possible to use different widths for chest strap and girth strap ( the chest strap could be wider):
10 mm/0,39“ (Size 1 - very small dogs or for cats)
15 mm/0,59” (Size 1 - for small dogs)
20 mm/0,79” (Size 2, maybe Size 1, if the dog is not to small or without padding)
25 mm/1” (Size 2 or more - for big dogs)
30mm/1,18“ for the chest strap in combination with a smaller one for the girth strap (for big dogs only)

Please note: Not every ribbon fits on all widths! Most of the ribbons don’t fit on 15mm/0,59” straps. But also on 20mm/0,79” webbing there are some ribbons which don’t fit. So please contact me before ordering for clarification if the selected ribbon is suitable for your strap.


Bottom:
Microfibre (selection) or leather (selection)
The padding is overlapping the edges of the webbing. So, the final strap is about 5-10mm (about 0,2” – 0,4”) wider than the webbing.

My products are made by hand with lots of love to the process. I take great care in matching colors of threads and material, so they blend in as much as possible. Of course, all my products have a stable processing and the materials are of high quality.

 

Used materials:
Webbing: 100 % Polypropylen (PP)
Ribbon: 100% Polyester
Lining: Microfibre (100% Polyester) or leather
Metal parts: steel or zinc diecasting nickel-plated
Buckle: acetate/nylon or aluminum (last with additional costs)

Laundry:
Harnesses with microfibre can be washed at 30° C/86° F in a laundry bag or by hand wash. Harnesses with leather padding can only washed by hand.

 

39,95 €

  • verfügbar
  • 5 - 9 Tage Lieferzeit1